Help 10/11/20

This is the front side:

Look good, right?
This is the back

Why is it doing this?  I've changed the needle, changed the bobbin, rethreaded the machine, made sure tension was right on the bobbin.  Arghh?

Any idea what to try next?
TIA
Angie
at

5 comments:

  1. ChantalOctober 12, 2020 at 6:10 AM

    You might have a little piece of thread in the bobbin area, under the metal plate. It happened to me. I understand the frustration. Good luck. ;^)

    ReplyDelete
  2. AngeiOctober 12, 2020 at 7:33 AM

    Try rewinding the bobbin. I’ve had that happen before and 7 out of 10 times then bobbin is not wound tight enough. The other times either my tension is off or I haven’t thread it properly

    ReplyDelete
  3. BillieBee (billiemick)October 12, 2020 at 7:34 AM

    Yikes! Hope you solved it.

    ReplyDelete
  4. DeannaOctober 12, 2020 at 9:38 AM

    Angie, something (lose thread or dust) is causing your upper tension to be off. Along with the previous suggestions, try running an unwaxed piece of dental floss through your upper tension.
    This has solved many problems for me. Hope you get it solved soon.

    ReplyDelete
  5. Wishes On OccasionOctober 25, 2020 at 7:49 AM

    This comment has been removed by a blog administrator.

    ReplyDelete

Thank you for stopping by. It's always nice to hear from you. I try to reply to each and every one of you, but sometimes life gets in the way. I hope you understand. Blessings.

Subscribe to: Post Comments (Atom)

Another Flimsy

I'm making the Raincross Quilt Guild's Block of the Month into baby quilts each month instead of blocks for an eventual quilt. Why? ...